We offer Halal and Kosher Sodium Caprylate made in an ISO9001:2008, ISO22000:2005 (FSSC22000) and cGMP certified facility, Anmol Chemicals a mubygroup company involved in manufacturer of Speciality Chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals. The group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa USA & china.
The units in the group have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal and DMF support is available.

Home ----------Contact

CarboyBarrelsBags PalletBig BagSodium Caprylate

Sodium Caprylate BP USP Commercial Pure & Food Grade Manufacturers

Sodium Caprylate SDS GHS, MSDS Sheet

Sodium Caprylate
BP USP Food Grade & Commercial Pure
Sodium Caprylate

CAS Number 1984-06-1:
EINECS EC Number: 217-850-5
Molecular Weight 166.19,
Molecular Formula: CH3(CH2)6COONa
Synonyms: Sodium n-octanoate; Octanoic acid Sodium salt

Sodium Caprylate BP Grade Ph Eur

Sodium Octanoate
C8H15NaO2 -- 166.2 -- 1984-06-1
Action and use: Excipient.

DEFINITION
Sodium octanoate.
Content: 99.0 per cent to 101.0 per cent (anhydrous substance).

CHARACTERS
Appearance: White or almost white, crystalline powder.
Solubility: Very soluble or freely soluble in water, freely soluble in acetic acid, sparingly soluble in ethanol (96 per cent), practically insoluble in acetone.

IDENTIFICATION
A. Chromatograms to pass the test.
B. To 0.2 ml of solution S (see Tests) add 0.3 ml of water. The solution gives reaction of sodium.

TESTS
Solution S: Dissolve 2.5 g in carbon dioxide-free water and dilute to 25 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
pH: 8.0 to 10.5 for solution S.
Related substances: To pass the test.
Heavy metals: Maximum 10 ppm.
Water: Maximum 3.0 per cent, determined on 1.000 g.

Sodium Caprylate USP Grade

C8H15NaO2 -- 166.20
Sodium octanoate -- [1984-06-1].
Sodium Caprylate contains not less than 99.0 percent and not more than 101.0 percent of C8H15NaO2, calculated on the anhydrous basis.

Appearance of solution: Dissolve 2.5 g of Sodium Caprylate in 25.0 mL of freshly boiled and cooled water: the resulting solution is clear and colorless, and if not, not more intensely colored than a reference solution.
Identification: A: To pass chromatogram Test.
pH: between 8.0 and 10.5, in a solution obtained in the test for Appearance of solution.
Water: not more than 3.0%.
Heavy metals : The limit is 5 µg per g.
Chromatographic purity: To pass the test.
Assay: Transfer an accurately weighed quantity of about 150 mg of Sodium Caprylate to a 125-mL volumetric flask, dissolve in 50 mL of glacial acetic acid, and titrate with 0.1 N perchloric acid VS, determining the endpoint potentiometrically. Perform a blank determination, and make any necessary correction. Each mL of 0.1 N perchloric acid is equivalent to 16.62 mg of C8H15NaO2.

For Original Monographs of Sodium Caprylate, please check with the web-pages of the Pharmacopoeia.

Sodium Caprylate Manufacturers

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

ISO 9000

Fracture Diverting Agent, Ferric Chloride Hexahydrate, Malic Acid, Skatole & Indole, Potassium Bicarbonate & Carbonate, Sodium Caprylate, Steartic Acid, Tartartric Acid

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan,etc.

Copyright and Usual Disclaimer is Applicable